Xinke began to get involved in the development of air conditioners as early as 1992, but due to its weak core technology and small production scale, with an annual production capacity of only 300,000 yuan, it may still be at the level of second- and third-tier brands in the next few years.
Xinke does not have self-produced compressors, and mostly uses outsourced Meizhi joint venture compressors for mobile air conditioners. Meizhi's low-end rotary compressor technology is relatively mature, and the quality and stability have been tested for many years.
In terms of evaporative condenser components, Xinke is currently cooperating with Fengrun Group, the largest evaporator and condenser manufacturer in China, so in terms of core components, Xinke will not have major quality and quality control problems.
The nominal average noise of Xinke mobile air conditioners is between 53-58dB, which is the average level of current mobile air conditioners, and it is inevitable that the noise is difficult to control in the integrated design mode. However, Xinke is not taboo about this problem, and it is clearly stated on the promotional page that it is not recommended for users to use it in the bedroom.
The condensate self-evaporation atomization system is the standard configuration of Xinke in mobile air conditioning, which can save users the trouble of self-drainage, but it should be noted that the condensate evaporation system is not omnipotent, if the air is humid (such as the rainy season in the south), after turning on the dehumidification mode, all condensate cannot be excluded, and users still need to connect to the drainage pipe for drainage.
Xinke focuses on cost performance, the price of Xinke S3 series and F1 series mobile air conditioners does not exceed 2000 yuan, of which the KY-20F1 model is as low as 1099 yuan, which is very suitable for people who will take mobile air conditioning as a transitional demand, these two series of models are filled with new R410a refrigerant, and the energy efficiency ratio is around 2.5.
The difference between the S3 series and the F1 series is that the S3 positioning is higher, the power is relatively large, and there is no 1 horsepower model, and the F1 fills this gap. Considering that the overall refrigeration performance of mobile air conditioners under the same power is actually similar at this stage, how to choose mainly depends on the actual budget, but no matter which series, it is recommended to buy models with higher power, such as KY-35F1, KYR-35S3, etc.
