In most people's eyes, a computer case is just a platform for loading a motherboard, so many cheap cases become the first choice for installers. The chassis is a DIY accessory with a relatively high fault tolerance rate, usually only need sufficient materials, thick enough plates, and reasonable air duct design to qualify, and if conditions permit, shoe boxes and express boxes can also be used as chassis. In fact, the chassis is very important for the protection of computer hardware, and a good air duct can not only enhance heat dissipation, but also prevent dust, and delay the rate of hardware aging. Choosing a chassis is not complicated, you need to first determine the appearance you like, secondly, confirm the size of the motherboard that can be carried, and finally understand the parameters such as the air duct, thickness and material of the chassis through various evaluations.
In the computer DIY accessories industry, the number of high-end brands is not large, CORSAIR is known for its quality, since 1994, its product line has been quite mature. Both the media and users have given CORSAIR a very high evaluation, and ten of PCGAMER's most recommended chassis products are from CORSAIR. Players love it, and the use of CORSAIR's DIY accessories is called "faith" by users, and once you get on the "Pirate Ship", you will be attracted by its high performance and there is no turning back.
The Obsidian 500D RGB SE is a high-end chassis rated as "Gamer's Favorite", which can be equipped with Mini-ITX, MicroATX, and ATX motherboards. Most tempered glass enclosures on the market require the screws to be removed to open them, but this case glass enclosure has a magnetic design that can be pulled with a single pull.
The chassis comes with 1 x USB 3.1 Type-C, 2 x USB 3.0, 1 x Audio/Microphone I/O, and comes standard with a Corsair RGB LED fan controller and three pre-installed RGB LED fans for RGB color adjustment. In addition to large air and water cooling, the chassis is highly scalable, and can also install two 2.5/3.5-inch and three 2.5-inch hard drives. The official price of this case is 2099 yuan, there is almost no unreasonable design, as a mid-tower case, the compatibility is strong, and it is worth buying.
Although CORSAIR has always been synonymous with high-end, that doesn't mean it doesn't have excellent mid-range products. The equally well-received Carbide 275R is perfectly compatible with ATX motherboards in a compact chassis. The white steel structure body and transparent side panels have a strong sense of integration. The front panel of the case supports the installation of a 360mm heatsink and six 120mm fans. The price is only 449 yuan, which is suitable for beginners and advanced users who like minimalist style water-cooled cases.
It should be noted that the 275R top fan design does not take into account the height of the memory, as long as the top fan and slightly higher memory are installed, you cannot install a radiator larger than 240mm, but the top fan is not a must-have for the air duct of this case, and can be discarded.
As a "faith" brand, CORSAIR takes into account the three high-end product lines, the cheapest mid-tower chassis is priced at 379 yuan, and many brands are high-end chassis at the same price, which is cost-effective, but the quality is worthy of the price, so you can start with confidence.
In addition, most brand cases come with a two-year warranty, which will not be repeated below. If the warranty is not enough to solve the problem, the merchant will directly replace the case, and consumers need to pay attention to the genuine authorization of the store when purchasing to avoid buying fakes.
